Electrical and Computer Engineering Publications
Research in Electrical and Computer Engineering Publications falls into eight broad and interlaced areas. These research areas are applied electrostatics and electromagnetics, biomedical systems, computer-assisted medical interventions, communication systems and data networking, microsystems and digital signal processing, power systems engineering, robotics and control and software engineering.
Submissions from 2015
Energy Forecasting for Event Venues: Big Data and Prediction Accuracy, Katarina Grolinger, Alexandra L'Heureux, Miriam AM Capretz, and Luke Seewald
Collaborative knowledge as a service applied to the disaster management domain, Katarina Grolinger, Emna Mezghani, Miriam AM Capretz, and Ernesto Exposito
Energy Cost Forecasting for Event Venues, Katarina Grolinger, Andrea Zagar, Miriam AM Capretz, and Luke Seewald
Limitations of ultra-thin transparent conducting oxides for integration into plasmonic-enhanced thin-film solar photovoltaic devices, Jephias Gwamuri, Ankit Vora, Rajendra R. Khanal, Adam B. Phillips, Michael J. Heben, Durdu O. Guney, Paul Bergstrom, Anand Kulkarni, and Joshua M. Pearce
In situ formation of substrate release mechanisms for gas metal arc weld metal 3-D printing, Amberlee S. Haselhuhn, Bas Wijnen, Gerald C. Anzalone, Paul G. Sanders, and Joshua M. Pearce
Impact of Snow and Ground Interference on Photovoltaic Electric System Performance, Negin Heidari, Jephias Gwamuri, Tim Townsend, and Joshua M. Pearce
Polymer recycling codes for distributed manufacturing with 3-D printers, Emily J. Hunt, Chenlong Zhang, Nick Anzalone, and Joshua M. Pearce
Evaluation of RepRap 3D printer workshops in K-12 STEM, John L. Irwin, Douglas E. Oppliger, Joshua M. Pearce, and Gerald Anzalone
Surgical simulation workflow representation using hierarchical task analysis and statecharts: Implementation on the evolution engine, Justin MacKenzie, Shaun Carnegie, James Schmalz, Mike Schmalz, Sandrine De Ribaupierre, and Roy Eagleson
Effect of ambient combinations of argon, oxygen, and hydrogen on the properties of DC magnetron sputtered indium tin oxide films, M. Marikkannan, M. Subramanian, J. Mayandi, M. Tanemura, V. Vishnukanthan, and J. M. Pearce
A novel synthesis of tin oxide thin films by the sol-gel process for optoelectronic applications, M. Marikkannan, V. Vishnukanthan, A. Vijayshankar, J. Mayandi, and J. M. Pearce
Neural Network Models for Software Development Effort Estimation: A Comparative Study, Ali Bou Nassif, Mohammad Azzeh, Luiz Fernando Capretz, and Danny Ho
Integrated voltage-current monitoring and control of gas metal arc weld magnetic ball-jointed open source 3-D printer, Yuenyong Nilsiam, Amberlee Haselhuhn, Bas Wijnen, Paul Sanders, and Joshua M. Pearce
A novel approach to obviousness: An algorithm for identifying prior art concerning 3-D printing materials, Joshua M. Pearce
Maximizing return on investment for public health with open-source medical hardware, Joshua M. Pearce
Low-cost open-source voltage and current monitor for gas metal arc weld 3D printing, A. Pinar, B. Wijnen, G. C. Anzalone, T. C. Havens, P. G. Sanders, and J. M. Pearce
Peanut shaped ZnO microstructures: Controlled synthesis and nucleation growth toward low-cost dye sensitized solar cells, M. Prabhu, J. Mayandi, R. N. Mariammal, V. Vishnukanthan, J. M. Pearce, N. Soundararajan, and K. Ramachandran
MLaaS: Machine Learning as a Service, Mauro Ribeiro, Katarina Grolinger, and Miriam AM Capretz
Optimization of annealing cycles for electric output in outdoor conditions for amorphous silicon photovoltaic-thermal systems, Joseph Rozario and Joshua M. Pearce
Open-source 3-D printing technologies for education: Bringing additive manufacturing to the classroom, Chelsea Schelly, Gerald Anzalone, Bas Wijnen, and Joshua M. Pearce
A novel method for assessing visual perception of surgical planes, Christopher M. Schlachta, Syed Ali, Hammood Ahmed, and Roy Eagleson
Preparation of meta-stable phases of barium titanate by Sol-hydrothermal method, Mahalakshmi Selvaraj, V. Venkatachalapathy, J. Mayandi, S. Karazhanov, and J. M. Pearce
The effects of PLA color on material properties of 3-D printed components, Ben Wittbrodt and Joshua M. Pearce
Total U.S. cost evaluation of low-weight tension-based photovoltaic flat-roof mounted racking, B. T. Wittbrodt and J. M. Pearce
Open-source photometric system for enzymatic Nitrate quantification, B. T. Wittbrodt, D. A. Squires, J. Walbeck, E. Campbell, W. H. Campbell, and J. M. Pearce