Electrical and Computer Engineering Publications

Influence of metal assisted chemical etching time period on mesoporous structure in as-cut upgraded metallurgical grade silicon for solar cell application

Document Type

Article

Publication Date

1-1-2019

Journal

Journal of Materials Science: Materials in Electronics

URL with Digital Object Identifier

10.1007/s10854-019-01191-6

Abstract

In this work, upgraded metallurgical grade silicon (UMG-Si) wafer was used to fabricate mesoporous nanostructures, as an effective antireflection layer for solar photovoltaic cells. The length of the vertical Si nanostructure (SiNS) arrays was altered by varying the etching time period during metal assisted chemical etching process, using a silver catalyst. The optical, structural, morphological changes and the antireflection properties of Si nanostructures formed on UMG-Siwafer were analysed. SEM and photoluminescence studies indicate that Si nanocrystals are formed on the surface and along the vertical nanowires. The pore size depends on the Ag nanoparticle size distribution. All the samples demonstrated a luminescence band centred around 2.2 eV. From the optical results, samples etched for 45 min show strong absorption in the visible spectrum. The minimum and maximum surface reflectance in the visible region was observed for 15 min and 60 min etched SiNS. Based on the observed results, 15 min etched Si with a uniform porous structure has minimum reflectance across the entire silicon UV–Vis absorption spectrum, making it worth further investigation as a candidate for use as an antireflection layer in silicon based solar cells.

This document is currently not available here.

Share

COinS